18
7 Adjust system
settings
Select blackout setting
You can set the screen to turn off automatically
after the unit is idle for 10 or 20 seconds.
1 Press MENU/DISP for 3 seconds.
2 Turn to select a setting:
[BKO 10 S] : Turn off the screen
automatically 10 seconds after last
operation.
[BKO 20 S] : Turn off the screen
automatically 20 seconds after last
operation.
[BKO OFF] : Never turn off the
screen.
Turn demo mode on/off
When demo mode is on, when the unit is idle for
more than 2 minutes, all functions are displayed.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [DEMO]
is displayed.
The screen shows current Demo »
mode setting.
3 Turn to select a setting:
[DEMO ON] : Turn on the demo
mode.
[DEMO OFF] : Turn off the demo
mode.
Select start volume
Each time you turn on the unit, it can play at the
last listened volume or at the preset volume.
1 Press MENU/DISP for 3 seconds.
2 Press or repeatedly to until [V -
LAST] or [V - ADJ] is displayed.
Other sound settings
You can also edit user preset EQ.
1 Press EQ/Audio for 3 seconds.
2 Press or repeatedly to select the
item to be adjusted:
[BAS] (bass) range: -7 to +7.
[TRE] (treble) range: -7 to +7.
[BAL] (balance) range: 12L to 12R. (L
= left speaker, R = right speaker)
[FAD] (fader) range: 12R to 12F. (R =
rear speaker, F = front speaker)
3 Turn to select a value.
EN
To Next Page
Loading...
