Philips CEM5000 - Bluetooth Calling; Terminate Call; Make a Call; Redial Number

1 Turn on bluetooth function on the device.
2 Search for other bluetooth devices that can
pair with your device.
3 Select “Philips” in the pairing list.
4 Enter default password “0000”.
» [Paired Ok!] (paired ok) displays on the
panel if pairing is successful.
The paired device connect to the car »
audio system automatically.
Make a call
Note
To make a call on this unit, the bluetooth •
connection between the unit and the phone
must be active.
1 Press until [NUM DIAL] displays.
2 Press 0-9 to enter phone number.
Press •
to delete entered numbers.
3 Press to dial.
To redial number:
1 Press .
2 Press or to choose [REDIAL] (redial).
3 Press again.
[Calling] » (calling) displays and the unit
starts dialing the number dialed last time.
To quick dial preset number:
1 Press .
2 Press or to choose [QUICK DIAL] .
3 Press 1 to 6 numeric keys to choose preset
numbers.
» Preset phone number displays.
4 Press again.
[Calling] » (calling) displays and the unit
starts dialing the selected number.
Terminate call
1 Press to terminate call.