Need help?Do you have a question about the Philips CM12 and is the answer not in the manual?
Describes the main microscope components and their functions.
Details the left and right control panels and their respective buttons and knobs.
Explains the components and features of the specimen holder.
Describes the side entry specimen chamber and its related controls.
Step-by-step guide to powering on the microscope system.
Procedure for heating and adjusting the filament for optimal beam generation.
Instructions for aligning the electron beam to the center of the screen.
Steps to align the thermionic gun for proper electron beam direction.
How to adjust the condenser aperture for proper beam spreading.
Method to correct astigmatism in the condenser lens for a circular beam.
Detailed instructions on how to prepare and place a sample grid onto the holder.
Guide on correctly inserting the specimen holder into the microscope chamber.
Procedure to optimize the sample's eucentric height for stable imaging.
Steps to align the rotation center of the sample for accurate tilting.
How to center the pivot point for stable beam positioning during sample manipulation.
Instructions for safely removing the specimen holder and sample.
Techniques for fine-tuning microscope settings to view sample details.
Steps for capturing digital images of the sample using the microscope software.
General| Brand | Philips |
|---|---|
| Model | CM12 |
| Category | Microscope |
| Language | English |
To Next Page