12
English
Using your Philips Colgate toothbrush
Brushing instructions
1 Firmly press the brush head down onto the
metal shaft of the handle until it stops. The
brush head bristles should be facing the same
direction as the front of the handle.
Note: It is normal to see a slight gap between
the brush head and the handle.
2 Wet the bristles.
3 Apply a small amount of toothpaste on the
bristles.
4 Place the toothbrush bristles against the teeth
at a slight angle (45 degrees), pressing firmly to
make the bristles reach the gumline or slightly
beneath the gumline.
Note: Keep the center of the brush in contact
with the teeth at all times.
5 Press the power on/off button to turn on the
Philips Colgate tootbrush.
To Next Page
Loading...
