www.philips.com/lighting
Printed in EU
Data Subject to change without notice
Version date : 31/01/2014
4443 160 03843
1
2
SERVICE: (DRIVER / BATTERY REPLACEMENT)
The batteries have a life time expectancy of 4 years.
Light source (LED) is not replaceable
.
Maintenance instructions
To assure the lighting quality of this unique LED lighting concept there are only a few
instructions regarding the maintenance of this LED luminaire:
* Do not touch electronic components!
Electronic components maybe under high voltage.
* Do not stare into LED light beam.
* The luminaire shall be installed by a qualified electrician and wired in accordance with
the latest IEE electrical regulations or the national requirements.
* Above average concentraion of sulfur effects the useful lifetime of the product.
E.g: Light color changes from white to blue. Typically in chicken & pig farms.
* Periodic tests should be performed according to EN 50172:2004, clause 7.2.3 and 7.2.4.
Each month the driver is running in emergency mode for 30 seconds.
Once a year a full discharge cycle of at least 1 hr or 3 hrs (depending on product installed)
should be performed.
A T T E N T I O N
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
DEVICES
MAXIMAL SCREWDRIVER SIZE: 8MM
A) OPEN LUMINAIRE
B) DECOUPLE BATTERY WIRES
LED22S LED34S LED40S LED60S
Ipeak [A] 21 19 22 19
Twidth [μs] 255 275 235 275
Drivers / MCB 16A type B [max.] 24 24 24 24
Drivers / MCB 10A type B [max.] 15 15 15 15
Drivers / MCB 16A type C [max.] 40 40 40 40
Drivers / MCB 10A type C [max.] 24 24 24 24
Max. Nr of products
C) UNTIGHT BATTERY
SCREWS
C 0-180 PLANE
C 90-270 PLANE
0
-5
-10
-15
-20
-25
-30
-35
-90
-45
5
10
15
20
25
30
35
40
45
0
20
40
60
80
100
-40
90
LIGHT INTENSITY
DISTRIBUTION CURVES
EMERGENCY MODE
To Previous Page
Loading...
Need help?
General
