Philips CoreLine WT120C LED18S/840 PSU L600 User Manual

CoreLine WT120C Waterproof
Installation instructions
www.philips.com/lighting
Printed in EU
Data Subject to change without notice
Version date 21/03/2014
4443 160 02896
Instructions de montage Instrucciones de montaje Kokoonpano- ja kiinnitysohjeet Szerelési utasítások
Montageanleitung Instrues de montagem Montaj yönergesi Návod k montázi
Montage instruktic Monteringsinstruktioner Oδηγίες εγκατάστασης инструкция по монтажy
Instruzioni di montaggio Monteringsvejledning Instrukcja montazu Návod k montáži
IP65
220
V
V
240
IK08
A
F
E
B
C
D
CLASS I.
+35°C
-20°C
GLOW
WIRE
850 v C
LIFETIME
50k HRS
4-5Nm
OPTIONAL ANTI-VANDAL MOUNTING
x 2
ACCESSORIES INCLUDED IN BOX:
E u 60
!
?
1.
A
B
C
D
E
F
WT120C LED18S/840 PSU L600 1800 661 388 19 0,93 6
WT120C LED22S/840 PSU L1200 2200 23
WT120C LED40S/840 PSU L1200 4000 41
WT120C LED34S/840 PSU L1500 3400 29
WT120C LED60S/840 PSU L1500 6000 57
Type
Luminous
Flux
CCT
82 87
1504
1223
Nr. of
clips
10
12
4000K
Dimension (mm)
38 96
960
1213 1,82
1,53
P
typ (W)
Intended for indoor use, ta=35°C MAX or Outdoor-temporary use

Philips CoreLine WT120C LED18S/840 PSU L600 Specifications

General

Model	WT120C LED18S/840 PSU L600
Luminous Flux	1800 lm
Color Temperature	4000 K
Length	600 mm
Optical cover/lens type	Polycarbonate
Beam angle	120 °
Power	18 W
Color Rendering Index (CRI)	80
Lifetime	50, 000 hours
Dimmable	No
Material	Polycarbonate
Power Supply Unit	PSU
Light source color	Neutral white
Input Voltage	220-240 V
Frequency	50/60 Hz

Summary

Product Specifications and Accessories

Technical Specifications Table

Details product types, luminous flux, dimensions, power, and clip count for WT120C models.

Included Accessories

Lists the components provided in the product box for installation.

Optional Anti-Vandal Mounting

Describes an optional mounting method for enhanced security.

Electrical Wiring and Connections

Through Wiring

Instructions for passing electrical cables through the luminaire.

Un-switched / Non-maintained Line

Wiring configuration for a non-maintained emergency lighting line.

Switched / Maintained Line

Wiring configuration for a maintained emergency lighting line.

Installation Steps and Protection

Remove Protection Film

Guidance on removing protective film from the luminaire before final installation.

Emergency Light Installation Steps

Details specific steps (5/A, 5/B, 5/C, 5/D) for emergency light installation.

Service and Maintenance

Service (Driver/Battery Replacement)

Instructions for replacing the driver or battery in the luminaire.

Light Intensity Distribution Curves

Graphs showing light intensity distribution patterns in emergency mode.

Maintenance Instructions and Precautions

General guidelines and safety warnings for maintaining the LED luminaire.