Philips D140 - Using Phone Features; Phonebook Management; Answering Machine Operation (D145); Handset Registration Process

4
Enjoy
Phonebook
Add record
1 Press .
2 Select [PHONEBOOK] > [ADD NEW].
3 Follow on-screen instructions.
Call from the phonebook
1 Press
.
2 Select a record and press .
Call log
Call from the call log
1 Press .
2 Select a record and press .
View record
Press
> > [VIEW].
Save record
1 Press
.
2 Select a record and press >
[SAVE NUMBER].
3 Follow on-screen instructions.
Delete record
1 Press
> > [DELETE].
2 Follow on-screen instructions.
Redial list
Call from the redial list
1 Press .
2 Select a record and press .
Save record
1 Press
.
2 Select a record and press >
[SAVE NUMBER].
3 Follow on-screen instructions.
Delete record
1 Press
> > [DELETE].
2 Follow on-screen instructions.
Telephone answering
machine (for D145 only)
Turn the answering machine on or o
1 Press > [ANSW MACHINE] > [ON/OFF].
2 Follow on-screen instructions.
• [ON] > [ANSWER ONLY] means the
answering machine is on. Calls are only
answered, messages are not recorded.
• [ON] > [RECORD ALSO] means the
answering machine is on. Calls are answered
and messages are recorded.
Listen to the incoming messages
Press
> [ANSW MACHINE] > [PL AY].
Delete an incoming message
1 When you listen to the message, press
to
enter the options menu.
2 Select [DELETE], then press
to conrm.
Register the handset or
additional handsets
You can register additional handsets to the base
station.
1 Press and hold on the base station for
10 seconds.
2 Press .
3 Select [SERVICES] > [REGISTER], then press
to conrm.
4 Enter the system PIN/passcode (0000).
5 Press
to conrm the PIN/passcode.
»
Registration is complete in less than
2 minutes.
Note
• The preset PIN is 0000.
• The handset and the base station are GAP
compliant, which means they guarantee the
minimum functions: register a handset, take
the line, make a call and receive a call. The
advanced features may not be available if
you use them with other makes. To register
the handset to another GAP-compliant base
station, follow the registration procedure of
that base station.
Restore default settings
You can reset your phone settings to the original
factory settings, and recall the original PIN/
passcode.
1 Press .
2 Select [SERVICES] > [RESET], then press
to conrm.
3 Follow on-screen instructions.