Philips D2702B/90 - Base Station Settings; Base Ringtone Settings; Deregister Handsets; Set Dial Mode

EN 31
Set the base’s ringtone
1
Press .
2 Select [BS SETTINGS] > [BS RINGER],
3 Select a volume level, then press to
The setting is saved.
Ring settings
levels or [OFF].
Set the base’s ringtone volume
1
Press .
2 Select [BS SETTINGS] > [RING VOLUME],
3 Select a volume level, then press to
The setting is saved.
Note
•
is silenced for all incoming calls.
13 Base settings
Set dial mode
The phone supports tone (DTMF) and pulse
(rotary) dial. The dial mode is preset to touch
tone dialing. If you have pulse (rotary) service,
you need to change the dial mode to pulse
dialing before using the telephone to make
a call.
1 Press .
2 Select [BS SETTINGS] > [DIAL MODE],
3 Select [TONE] or [PULSE], then press
The setting is saved.
• The preset PIN is 0000. If the PIN is
incorrect, the deregistration fails and the
screen returns to the previous menu.
• A handset cannot deregister itself.
Note
Deregister the handsets
1 Press .
2 Select [BS SETTINGS] > [DELETE HS],
[PIN? - - - -] displays; the “- - - -”
0000.
To erase a character, press .
The PIN will be masked as ****.
3
The deleted handset will be
removed from the registered
handsets list, and the antenna icon
will disappear. [REGISTER] displays.
Note
Available only for D275.