• If the PIN is incorrect or no base is found
within a certain period, the handset will
fail to register to the base. [REGISTER]
displays if the handset fails to register to
the base.
• If registration fails, unplug the power
adapter from the base station and plug
it back. Wait for 15 seconds, and then
repeat the registration procedure.
• The preset PIN is 0000.
EN 33
14 Registration
Register additional handsets
You can register additional handsets to the
base station. The base station can register up
to 4 handsets.
1. If the handset is in [REGISTER] status,
press
.
2. Select [REGISTRATION], then press to
[PIN? - - - -] displays; the “- - - -” cursor
0000.
To erase a character, press .
The PIN will be masked as ****.
3.
to
[PLEASE WAIT] displays.
4.
Press and hold
at the telephone base
You hear a beep when the registration
process completes.
Registration is complete in less than 1
minute. The base automatically assigns
a handset number to the handset.
Note
To Next Page
Loading...
