3
4 How to install Philips LED DayLight 8 on your car
Insert LED
DayLight 8 module into
the bracket only after
it is mounted on the car!
How to install the LED modules using clip-on brackets
Useful information for LED DayLight 8 customized installation
Space required for LED
module installation
Make sure you have the above
space available to install each
module.
If necessary, cut out
to exact size (see above).
Snap out the protective pieces
from the back of the LED
module. You may use the M5
tapped holes inside the module’s
body for any other type
of mounting.
Depending on your car model,
the customized installation may
be performed:
- with or without using
the clip-on brackets
- with or without cutting out
the surface.
1
1
2
2
3
3
4
EN
1 Installation on horizontal surface 2 Installation on vertical surface
To Next Page
Loading...
