EasyManua.ls Logo

Philips Lightolier Solution Series User Manual

Philips Lightolier Solution Series
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Solution Series
Fully Recessed Architectural Emergency Lighting
Page 1 of 2
Job Information Type:
Job Name:
Cat. No.:
Notes:
Features
Illumination: Illumination
is provided by two high-
performance 35 W MR16
lamps combined with a
reflector system. Optical
assemblies can be rotated
from 0° to 90° for corner
installations. IES photometric
data files are available upon the
website.
Installation: Mechanical or
sheetrock ceiling installation
is enabled using optional bar
hangers or structural support
wire (supplied by others).
Housing: Backbox
constructed of 20 gauge
galvanized steel. Flush cover
and diffusers constructed of
impact-resistant polycarbonate.
Optional white or black
housing is available. Suitable for
wall or ceiling mounting. Wall
mounted units can be fastened
to wood or metal studs from
either the left or right side.
Mechanical ceiling mounting
is accomplished with grid
ceiling bar hangers (ordered
separately).
Operating Temperature
Range:
65°F (19°C) to 85°F (30°C).
Diagnostic Electronics
(standard): 120/277 VAC
dual voltage input with surge
protection is standard on all
models. Charging system is
microprocessor driven with
software embedded diagnostic
routine and precision
temperature compensation.
Surge protection, brownout,
AC lockout, and low voltage
disconnect features are
standard.
Self-Testing Diagnostics
(optional): The diagnostic/
charging platform with optional
self-testing mode automatically
runs a one-minute self-test
every 30 days and a 30-minute
test on the sixth and twelfth
month. A one-minute or
90-minute test may be initiated
via the push to test switch on
the unit or by activating the
appropriate test command on
the optional IR test device.
Electrical Specifications:
0.27 A (120 VAC)
0.13 A (277 VAC)
Battery: Maintenance-free,
sealed lead calcium batteries
supply 90 minutes of
emergency power. Estimated
service life of 5 to 7 years.
Code Compliance
UL 924 listed for insulated
ceiling systems (IC rated).
NFPA 101, NEC, BOCA,
OSHA and IBC illumination
standards. Meets ADA
specifications for wall mounted
lighting fixtures.
Warranty
Three year full electronics
warranty. One year full plus
four year prorated lead calcium
battery warranty.
SOLWCLSD2
10.5"
(26.7 cm)
15.5"
(39.4 cm)
13.6
(34.5 cm)
9.0"
(22.9 cm)
3.7"
(9.4 cm)
.5"
(1.3 cm)
SOLWWLSD2
10.5"
(26.7 cm)
15.5"
(39.4 cm)
13.6
(34.5 cm)
9.0"
(22.9 cm)
3.7"
(9.4 cm)
.56"
(1.4 cm)
.5"
(1.3 cm)
Question and Answer IconNeed help?

Do you have a question about the Philips Lightolier Solution Series and is the answer not in the manual?

Philips Lightolier Solution Series Specifications

General IconGeneral
BrandPhilips
ModelLightolier Solution Series
CategoryLighting Equipment
LanguageEnglish

Summary

Product Features and Specifications

Illumination

Two high-performance 35W MR16 lamps with reflector system. Optical assemblies rotate 0-90°.

Installation

Mechanical or sheetrock ceiling installation using optional bar hangers or support wire.

Housing

20 gauge galvanized steel backbox; impact-resistant polycarbonate cover/diffusers.

Operating Temperature Range

65°F (19°C) to 85°F (30°C).

Diagnostic Electronics

120/277 VAC dual voltage input with surge protection. Microprocessor driven charging system.

Self-Testing Diagnostics

Optional mode runs automatic 1-min self-test every 30 days and 30-min test bi-annually.

Electrical Specifications

0.27 A at 120 VAC, 0.13 A at 277 VAC.

Battery

Maintenance-free, sealed lead calcium batteries supply 90 min emergency power. Life: 5-7 years.

Code Compliance

UL 924 listed for IC rated systems. Meets NFPA, NEC, OSHA, IBC, and ADA standards.

Warranty

Three year full electronics warranty. One year full plus four year prorated battery warranty.

Ordering and Optics Information

Ordering Information

Details on series, housing color, mounting, model designator, and factory installed options.

Accessories

Optional items including remote test devices, bar hangers, lens kits, and test switch kits.

Recessed Wall Mount Optics

Footcandle data for two fixtures at 7.5' AFF, showing average, minimum, and maximum values.

Recessed Ceiling Mount Optics

Footcandle data for two fixtures at 10' AFF, showing average, minimum, and maximum values.

Related product manuals