Philips DCC 170 - SEARCH; Track Search; Passage Search; Reversing Playback Direction

English
SEARCH
The and buttons can be used to search for a
passage or a particular track on the tape.
PREVIOUS/NEXT TRACK SEARCH _
• When you use the and buttons during playback,
you can search for a particular track on the tape.
• Press to search for the beginning of the current track,
• Press to search for a track next to the current track.
• If you press these buttons several times, the forward or
backward step increases by one music track for each
depression of the buttons,
• When the deck reaches the selected track playback will be
continued automatically.
yVofe; During the search, the audio signal will be muted.
“ In case you are using a DCC cassette the tracks on the tape
are recognized by the player each time a next start marker
is detected
-When you are using a conventional cassette the tracks on
the tape must be separated by a silent passage of at least
4 seconds.
-When the end of side B is reached during next track search
( ►► 1). the player will enter the Stop mode.
-When the beginning of side A is reached during previous
track search {! ◄◄ ). the player will also enter the Stop
mode.
During next track search the display will show for instance:
*7
7:04
To .5
ABS
_ -0*
—
-When you are using a user-recorded DCC cassette or a
conventional cassette, the display will show the forward or
backward steps.
TITLE SEARCH _
If you have selected the text mode (with the TEXT button), the
title of the selected track (up to 24 tracks) will be shown on
the display during previous or next track search.
yVofe;Title search is only functional when you are using
prerecorded DCC cassettes.
SEARCHING FOR A PASSAGE _
• When you use the and buttons while the
player is in the stop mode, you can search for a passage
on the tape.
• Press ► IH to search in the tape travel direction (foavard).
• Press to search in the opposite direction in which
the tape is travelling (backward).
• The winding will continue untill you press
PLAY/SIDE ◄ ► or STOP/OFF M.
During search the display will show for instance:
REVERSING THE PLAYING DIRECTION _
• You can reverse the tape travel direction by pressing
PLAY/SIDE ◄ ► during playback.
The selected side for DCC cassettes is indicated on the
display as A or B.
The selected side for conventional cassettes is indicated
on the display as FWD or REV,
• When you press this button, the playing direction will be
reversed and playback will be continued on the other side
of the tape.
Notes:
During search the meter indicates the tape running direction
and the position on the current tape side.
-The upper meter indicates the tape ainning direction.
Forward:'-' will be moving from left to right
Backward:will be moving from right to left,
- The lower meter indicates the approximate position of the
current tape side (in six steps)
Beginning:is shown at the left end of the display
End:is shown at the right end of the display
Bemarfcior some analog cassettes, the meter is not able to
indicate the correct tape position.
12