Philips DCC 170 - RECORDING OF MARKERS; Automatic Start Marker Recording; Manual Start Marker Recording

RECORDING OF MARKERS
Recording of most markers can be done automatically or
manually.
• You can select the AUTO or MANUAL mode for recording
start markers by pressing the MKR MODE key.
(not possible in recording pause mode).
-When the AUTO indication lights up on the display, the
automatic marker write mode is selected.
-When the AUTO indication does not light up on the
display, the markers can be recorded manually.
/Vote; When the microphone input is selected, it is not
possible to perform automatic marker recording (only
manual).
RECORDING A START MARKER
AUTOMATIC RECORDING OF START MARKERS
This mode is recommended when you are recording from a
CD orDCC source.
• Select AUTO by pressing the MKR MODE key.
The indication AUTO lights up on the display.
-When you are recording via the digital/optical connection,
the input signal automatically transmits information about
the start of a new track to the DCC170. Start markers will
then be recorded automatically.
Caution: Stan markers may not be recorded correctly when
random playback has been selected on your CD player.
-When you are recording via the analog (LINE) connection, a
start marker will be written each time a silent passage of
more than three seconds is detected.
Caution: In some cases a very faint passage in a piece of
music can be picked up by your DCC as a silent passage
and a start marker will be written.
MANUAL RECORDING OF START MARKERS
♦ Press the MKR MODE key until AUTO no longer lights up
on the display.
Start markers can now be recorded manually by pressing
the MKR WRITE key at the desired positions on the tape.
The marker will be recorded (WRITE lights up on the
display) and the tracknumber will be increased by one each
time a new marker is recorded.
~5 18^36 Rec^
ass auto OTjTE 0
/Vote; Even when automatic start marker recording has
been selected, you can manually add start markers.
Press MKR WRITE at the desired position to record an
additional start marker. This Is useful when you want to
mark a certain position on the tape (convenient search).
17
English