Philips DCC 170 - INTRODUCTION

INTRODUCTION
CONTROLS
INTRODUCTION _
Philips has now further developed the music cassette - and
the result is the DCC.
DCC (Digital Compact Cassette) fills the large gap between
the music cassette and the compact disc.
DCC is capable of being recorded on and played back just like
the musicassette.
DCC plays music digitally on a new design, new style audio
cassette. It produces digital sound of high dynamic range and
Compact Disc quality.
The DCC 170 incorporates the latest 18 bit DCC technology.
The high sound quali^ is guaranteed by sophisticated CIRC
error correction circuitry and PASC coding.
Please read the operation instructions carefully to be
able to enjoy the troublefree operation of the DCC 170
for a long time.
The type plate is located on the base of the set.
CONTROLS (illustration on page 3).5
CONTROLS (illustrations on page 4).6
DISPLAY.. . 7
REMOTE CONTROL .. 7
POWER SUPPLY...8
CONNECTIONS .. 9
OPERATION. 10
PLAYBACK. 1 1
SEARCH...12
TEXT/TIME INFORMATION.13
RECORDING. 14 -15
MARKERS.....16
RECORDING OF MARKERS.17-19
TROUBLESHOOTING.20
MAINTENANCE .. 2 1
TECHNICAL DATA.....22
FRONT AND TOP PANEL (illustration on page 3)
COUNTER to select the tape counter to be shown on
the display and to reset the tape counter
to '0000*.
TIME for selecting the different time modes to
be shown on the display: absolute time,
track time, total time and total remaining
time. Press to scroll through the different
modes.
Only functional for DCC cassettes
TEXT for selecting text information to be shown
on the display.
Keep this key pressed to scroll the track
title.
Press this key briefly to scroll the album
title and the artist
Only functional for prerecorded Digital
Compact Cassettes
MKR MODE for selecting automatic or manual marker
writing, (only functional for DCC cassettes)
In recording pause mode: for selecting
the different markers to be recorded
MKR WRITE for manual recording of various markers
(only functional for DCC cassettes)
PLAY/SIDE ◄ ► for starting playback and for changing the
playback side of the tape
STOP/OFF ■ to stop the tape transport.
in stop mode:XQ turn off the power
in power off mode: to start charging the
battery
OPEN***** to open the cassette compartment
REC PAUSE for selecting the recording pause mode by
sliding this switch to the right.
(Only functional for DCC cassettes)
►► I in stop mode: to advance the tape
forward
duringpIayback:Xo skip to the next
track.
If you press this button several times, the
forward step increases by one music track
for each depression of the button.
in stop mode: to rewind the tape
duringplaybacfcXo skip to the start of
the current track.
If you press this button several times, the
backward step increases by one music
track for each depression of the button.
5
Suomi
Svenska
Dansk
Portuguis
Italiano
Espanol
Nederlands
Deutsch
Frangais
English