Philips DCC 300 - Troubleshooting Common Errors; Error: PRESS STOP; Error: TAPE BLOCKED; Error: NO CASSETTE Detected

What appears to be a malfunction may not always be serious.
Make sure first ...
_
1.
ae
Oe
ee
eee
TIT
Fe
T
a
BITE
abee
sf
SIDE
Ea
|
L SESUSUSNLERRUDERAAIESIET
FR UBEUEUEEREAUSA009 R200
-dB 60 50 46 30 25 2015129 6 4 2 6
Parity to
PS Ee yd
L. SUMUMAUUERELUSRSERERUEEL
iasecoiiueemaearieiein Cause: [he CD player does not send any signal in ‘STOP
-dB 60 50 40 30 2 20 15129 6 4 26 mode.
Cause: You have pressed a key during a function which Solution: Set the CD player into ‘PAUSE’ mode.
can not respond to this key.
Solution: Press the STOP key. Cause: The digital source has failed (i.e. loosened cable),
the unit is switched to STOP.
Solution: Check the connections and try again.
Cause: ‘Digital’ has been selected at the unit. If the
digital source is missing, recording can not be
started. |
Cause: For some reason, the compartment cannot be Solution: Check the connections and try again.
openend or closed (e.g. cassette not correctly
inserted, compartment touched an object when it
was opened). Cause: Some CD players do not send a digital signal
| according to EBU standard.
Solution: © Be sure to correctly insert the cassette in the
cassette compartment. Solution: Contact the corresponding service organisation
e Ensure that the compartment nas sufficient for your CD player.
clearance for opening and closing.
dace
TivtltirituT ore
/ if NEP Eb Ff bo
1 WERRENESOMQORENGINDURIUE
FR ANNURNERNUNCSONGKSEaSEa0
-dB 60 50 40 30 25 20 15129 6 4 2 0G
Cause: [he copy protection has detected that this
recording is not permitted (record source
copyrighted).
Cause: The compartment has been closed without
containing a cassette.
Solution: Close the compartment after you have inserted a
The ‘DCC 300’ operates with a Serial Copy.
cassette.
Management System, which includes that a fully
digital copy can be made from prerecorded digital
material but only directly from the original
material.
Solution: Recording can only be made via the analogue in
and output sockets.
-dB 60 50 40 30 25 20 15 129 6 4 2 0
Cause: The selected track number does not exist.
Solution: Enter an existing track number.
Cause: The required music track does not exist, playback
is continued.
Solution: Select another music track.
19