Philips DCC 300 - Troubleshooting Continued; Error: NO AUDIO SIGNAL; Error: NO TEXT INFORMATION; Error: NO DCC Cassette Used

SIDE
ee i ae C4
INE hf
L
R
-dB 60 50 40 30 25 20 15129 64 249
You have inserted a data cartridge. The unit is
switched to ‘STOP’.
Cause:
Solution: Insert a music cassette in the compartment.
8.
Cause:. There is no text information.
Solution: You have inserted a cassette in the compartment,
which does not contain any text information.
-dB 60 50 40 30 25 20 15129 6 4 2 0
Cause: You have tried to start recording with an ‘ACC’.
Solution: Insert a ‘DCC’ into the tray.
Cause:
You have tried to start recording with a recording
protected cassette.
Solution: Push the red button on the user-recorded DCC
down (towards protective touch slider).
20
R . .
-dB 60 50 40 30 25 20 15 129 6 4 2 0
Cause: The CD player does not send any signal in ‘STOP’
mode.
Solution: Set the CD player into ‘PAUSE’ mode.
12.
SIDE
Pill wll iba a rT rit
PVE IML EO —_! ! bal
L
R .
-dB 60 50 40 30 25 2015 129 6 4 20
Cause: The ‘DCC’ was not recorded by using the
‘APPEND’ function. Therefore ‘RENUMBER’ is
not possible.
Solution: Please use for future recordings the ‘APPEND’
function.