Philips DCM129/12 - Connect; Connect Speakers; Connect Power

6 EN
3 Connect
Connect speakers
Note
•
Insert the stripped portion of each speaker wire into
the socket completely.
• For optimal sound, use the supplied speakers only.
• Connect only speakers with impedance that is the
same or higher than the supplied speakers. Refer to the
Specicationssectionofthismanual.
Insert the speaker wires completely into the
speaker input sockets on the back of the unit.
Connect power
Caution
•
Risk of product damage! Make sure that the power
supply voltage corresponds to the voltage printed on
the back or the underside of the Micro Hi-Fi system.
• Before connecting the AC power cord, make sure that
you have completed all other connections.
Connect the AC power cable to the power
outlet.