Philips DFR9000/01 Quick Install Guide

DFR9000
Quick Install Guide 1.
Installation
English
DFR9000
Quick Install Guide 1.
Installation
English
CD IN CD-R IN AUX IN
SC ART INPUT
TV
M-CH OU T
CD IN CD-R IN AUX IN
SACD Player
CD IN CD-R IN AUX IN
AUDIO IN AUDIO OUT
AUDIO OUT
AUDIO OUT
TV
DV D Recorder
Game
console
IN AUX IN
HDMI OUT
HDMI OUT
HDMI IN
HDT V
SACD Player
HDMI
Source Device
OPTIC AL OUT
DIGITAL OU T
DIGITAL OU T
OUT
DIGITAL AU DIO
IN
Satellite
Receiver
DV D Player
CD Player
CD Recorder
CD IN CD-R IN AUX IN
MW
FM
DAB
Also see chapter 4.2 of the Instructions for use. Also see chapter 4.5 of the Instructions for use.
Also see chapter 4.3 of the Instructions for use. Also see chapter 4.6 of the Instructions for use.
Also see chapter 4.4 of the Instructions for use. Also see chapter 4.10 of the Instructions for use.
TV Analogue multichannel equipment
Analogue stereo audio equipment Digital HDMI equipment
Digital audio equipment Antennas
CD IN CD-R IN AUX IN
CENTRE
TV
FRON T
LEFT
FRON T
RIGHT
ACTIVE
SUB
WOOFER
SURROU N D
RIGHT
SURROU N D
LEFT
SURROU N D
BACK
LISTENING POSITION
Speakers: 6.1 setup
Also see chapter 4.5 of the Instructions for use.
CD IN CD-R IN AU X IN
SC ART 1
SC ART 1 (TV) SC ART 1 (TV)SC ART 2 (AUX)
SC ART 1
TV
DV D Recorder
VCR
CD IN CD-R IN AUX IN
YPb
Progressive SCAN input
Progressive SCAN output
Pr
YPbPr
TV
DV D Player
Also see chapter 4.7 of the Instructions for use.
Also see ‘TV Out’ in chapter 10.5 ‘Picture menu’
of the Instructions for Use.
Video equipment
- Scart RGBS
The DIGITAL IN 1 and OPTICAL IN digital input sockets are
preassigned as audio inputs for VIDEO 1 IN and VIDEO 2 IN.
In case the connected equipment does not provide digital output,
you should reassign other (analogue) audio input sockets for audio
connection to this specific device.
For this see ‘Reassigning input sockets’ under ‘Preparation and setup’.
Video equipment
- Progressive Scan (Ycb/Cr,YPb/Pr)
21
DFR9000_English_QIG.qxd 18-01-2005 14:36 Pagina 1

Philips DFR9000/01 Specifications

General

Power output	2 x 100W (RMS at 8 ohms)
Total harmonic distortion	<0.1% (1kHz, 50W)
Input sensitivity	200 mV
Tuning range	FM: 87.5 - 108 MHz
Frequency response	20 Hz - 20 kHz
Video Connections	Composite video input/output
Input Impedance	47 kOhms (line)