Philips DS3600 - Page 10

10EN
2 Turn on Bluetooth function on your device.
 Different devices may have different
way to activate Bluetooth.
3 Scan Bluetooth devices that can pair with
your device.
4 When “PHILIPS DS3600” is displayed on
your device, select it to start connection.
» 
heard and the Bluetooth indicator light
up stably if connection is successful.
5 Play music in your device.
» Music comes through the docking
speaker.
Tip

If your Bluetooth device has been paired with DS3600


To disconnect Bluetooth:
 Press
on the docking speaker again, or
 Deactivate Bluetooth function on
your device or move it beyond the
communication range.
Play from an external audio
device
1
If no iPod/iPhone/iPad is docked, connect
an MP3 link cable (3.5mm, not supplied) to:
 the MP3-LINK socket at the back of
the docking speaker.
 the headphone socket on an external
device.
» The docking speaker switches to MP3
link mode automatically.
2 Play music on the device (see the device's
user manual).
Tip

You can select MP3 link source by pressing on the
remote control.
Adjust volume
To adjust volume:
 Press +/- on your docking speaker; or
 Adjust the volume control of your iPod/
iPhone/iPad, Bluetooth device, or other
external device.
Mute sound
During play, press to mute or unmute sound.