Philips DST5030/80 - Product Information; Functional Features; Product Specifications & Dimensions

Published by Philips Consumer Lifestyle Page 4 of 14 For internal use only
Document No. : CSW-07-081-20617
Product Information
Functions/ Features information
Easy to use
Water Advice
 Drip stop system
 In case you live in an area with hard water,
 Tap water suitable
(eg: water hardness more than 8dGH), it is
 Safety Auto Shut Off (for ASO version only)
Recommended to use a mixture of 50% tap water
 Robust heel rest
And 50% demineralized water.
 Extra large filling hole
 Water Tank Capacity: 320ml
SteamGlide Plus Soleplate
 Steam Glide Plus Soleplate with its advanced
Fast crease removal
titanum layer and 6 layer coating delivers ultimate
 SteamGlide Plus
gliding performance over any fabric. Non-stick,
 Power: 2400W ~ 2600W
scratch resistant and easy to keep clean.
 Continuous steam output: 40g ~ 45 g/min
 Steam boost: 160g ~ 200g
Vertical Steam
 Spray feature
 This features a steam boost in vertical position to
 Vertical Steam
remove wrinkles in hanging garments
Drip Stop
Steam boost
 The Water Tank Bottom has a Valve that is
 The steam boost helps to remove stubborn wrinkles.
Controlled by a bimetal disc on the Soleplate.
Water is only released into Steam Chamber via
Product size & weight
the Tank Valve when the Soleplate temperature
 Product dimension (W x H x L)
Is high enough. When the Soleplate temperature
147 x 127 x 312 mm
is too low, the Tank Valve is closed. This prevent
 Weight of Iron: 1.552Kg
water from dripping onto garment.