Speaker Setup, 3D Sound 37
Speaker Setup
Adjust DOWNMIX according to how you connected the DVD Player to your
TV and/or Stereo. Balance the volume during playback by adjusting Dynamic
Range Control (D.R.C.).
1
Press SYSTEM MENU.
2
Press 4 to select SPEAKER SETUP, then press OK.
3
Press 3 or 4 to select DOWNMIX or D.R.C., then
press 2 and follow step 4 according to your choice.
4
• If you selected DOWNMIX, press 3 or 4 to select LT/RT
(left/right) or STEREO, then press OK. Choose LT/RT if you con-
nected the Player to a stereo that has Dolby Pro Logic. Details are on
page 13. Select STEREO if you connected the Player to a TV or Stereo
that has left and right Audio In jacks but does not have Dolby Pro
Logic.
• If you selected D.R.C., press
3
or
4
to select ON or OFF, then
press OK. To level the volume during Disc playback, choose ON.There
will not be such a large range between the loudest and softest parts of the
sound.To hear the highs and lows of the volume, set D.R.C. to OFF.
5
Press SYSTEM MENU to remove the menus.
1,5
2-4
3D Sound
Once you set DOWNMIX to LT/RT or STEREO, you can choose whether
to activate the fuller 3D (three-dimensional) sound during Disc playback.
1
Press the DISPLAY button.
2
Press 2 repeatedly to select ON or OFF beside 3D.Then,
press 3 or 4 to choose ON or OFF.
3
Press DISPLAY to remove the Display.
To Next Page
Loading...
