Philips DVDR3480 - Step 2: Optional Connections (continued); Connecting VCR and Cable Box;Satellite Receiver

1.2. Dismantling of the Front Panel
1) Remove 7 screws to loosen Top cover 240.
2) Remove 2 screws to loosen the Plate Front Loader 197. Then remove one more screw and detach the
Front Cabinet Assembly 0901 as shown in figure 3.
Figure 3 – Unscrew the screws to detach front panel
3) Remove two more screws and detach the Plate Front Loader 197 from the Cabinet Front Assembly 0901.
The Front Panel service position is shown in Figure 4.
Figure 4 - Front Panel Service Position (Plate Front Loader detached)
Insulation Sheet
1.3. Dismantling of the Basic Engine
1) Remove 4 mounting screws and dismantle the Basic Engine 1001 as shown in figure 5.