Philips DVDR7310H - Page 74

English
System Menu Options (continued)
Access settings (underlined options are the factory default settings)
You will be prompted to enter the four-digit pin code.
– When doing this for the  rst time, use the alphanumeric keypad 0-9
on the remote control to enter any four-digit pin code you prefer.
– If you forget your four-digit pin code, key in ‘1504’. Then enter any
four-digit you prefer and enter the same pin code again to con rm it.
Childlock
With this feature, you can prevent children from viewing certain discs or
the recorded titles in the HDD. When this feature is enabled, it will
appear as { CHILDLOCK } at the bottom of the coloured options screen
whenever you select a title in the content menu. You can press the
Yellow button on the remote control to set the childlock on or off.
Note: This recorder can memorise settings for 50 discs.
{ On } – Turns on child lock function. A four-digit pin
code must be entered in order to play the
locked disc or title in the HDD.
{ Off } – All discs can be played.
Change PIN
Use the alphanumeric keypad 0-9 to enter your new four-digit pin code.
You must enter the same pin code again to con rm it. To cancel your
change, press  to select { Cancel } in the menu and press OK on the
remote control.
Features settings (underlined options are the factory default settings)
Auto resume
With this feature, you can resume playback of the disc from its last
stopped point. This applies to the last 20 DVDs and Video CDs you
played.
{ Off } – The disc will always start from the beginning
when you load a disc or start playback.
{ On } – Turns on auto resume mode.
When playback stopped, the content menu will
appear. To resume playback, press OK while
selecting the title in the menu.
Note: Pressing PLAY
 will cancel the resume mode and start
playback from the beginning of the disc
.
####
Enter PIN of your choice
This will be used to access locked features.
PIN Code
Cancel
74