Philips DVDR80 - Page 102

92
8 Check the data you entered.
If necessary, go back a position to change entered data using the green
function button.
9 Enter the programme number of the TV channel using the number
buttons 0..9
Quality Frequency VPS/PDC Home
Recording quality M2, Recording quality M2
Grid Search Schedule Info
Watch/Record Qual. Freq. Timing
21-Oct 20:00 21:30 BBC1 M2 Once +0
Selecting a TV channel from the listing
You can only use this function if data from the GUIDE Plus+
®
system is
already available.
1 Press the yellow function button. You will see an overview of all
channels
2 Select the TV channel you want to program using D , C , P- B ,
P+ A . You can browse back or forth using O , N .
3 Confirm with OK .
Programme numbers of the scart sockets 'EXT1', 'EXT2' and the
front sockets 'CAM1', 'CAM2'
You can also program recordings from external sources.
1 Select the corresponding input socket using P- B or P+ A .'EXT1'
( EXT 1 TO TV-I/O ), 'EXT2'(EXT 2 AUX-I/O ), 'CAM1'
( S-VIDEO and VIDEO ), 'CAM2'(DV IN ).
2 Confirm with OK .
Tip
Changes using the colour buttons
You can use the colour function buttons to make the following settings. Make
sure that the right tile is selected.
'Qual.': Red function button
Select the recording quality
'Frequency' : Green function button
'Once': single recordings
'M-F': Repeated daily recordings (Monday to Friday).
'Mon': Repeated weekly recordings (every week on the same
day, e.g. Monday).
Activate VPS/PDC ('Timing'): Yellow function button
Using this button, you can activate (appears)
or deactivate ('VPS/PDC' disappears)
'VPS/PDC' in tile 'Timing'
Tip
0 To find out how you can go back and change the data, read the
section on 'How to change or delete a programmed recording
(TIMER)'
.
A Insert a DVD ready for recording (not locked).
The inserted disk is checked.
B Search the position on the disc where the recording should begin.
C Switch off the DVD recorder using STANDBY m .
The programmed recording functions only if the DVD recorder has
been switched off using STANDBY m .
If one or more recordings have been programmed 'TIMER' will light up on the display.
Programming a recording (TIMER)