50
Selecting the recording mode (quality)
By selecting a recording mode, you define the picture quality of recordings and the maximum
recording time for a disc.
You can check the quality by switching to a recording mode and then watch the picture via the
built-in tuner ( MONITOR button).
For playback, the correct picture quality will automatically be selected.
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 On the front of the DVD recorder select the recording quality using
REC MODE .
You can also use the button REC. MODE on the remote control.
Which recording types can I choose?
'HQ/HQ': HighQuality offers the best picture quality and a recording time of
60 minutes.
'SP/SP': StandardPlay (pre-recorded DVD quality) offers excellent picture
quality with a recording time of 120 minutes.
'SP+/SP+': StandardPlay(better than S-VHS quality). Recording time 150
minutes.
'LP/LP': LongPlay (S-VHS quality). Recording time 180 minutes.
'EP/EP': ExtendedPlay (better than VHS quality). Recording time 240
minutes.
Can I select the recording type via a menu as well?
1 Press the SYSTEM-MENU button.
2 Select '
A
' symbol with D or C .
3 Select 'Record settings' using D or C and confirm with C .
4 In the line 'Record mode' select the recording type with B or A .
5 Confirm using OK and SYSTEM-MENU .
6 If you have selected the recording type 'LP/LP'or'EP/EP', you can
select the settings 'Stndrd' (Standard) or 'Sport' (for fast movements) in
the 'Filter mode' line.
Tip
Manual recording
To Next Page
Loading...
