75
Features
Access control Enter code…
Status box On
Auto resume On
Low power standby Off
6 Confirm 'Access control' using C .
7 Enter a 4-digit code of your choice. If the code is new, you may have
to enter the code a second time as confirmation.
8 Select the 'Parental level' using A or B and confirm with C .A
bar appears to select the parental level.
9 Select the appropriate rating using B , A or the number buttons
0..9 .
What do the ratings mean?
Rating 0 (displayed as '--') parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene contains a higher level than the rating
set?
If the recorder does not find a suitable alternative, playback will stop and you
must enter the four-digit code.
Tip
0 Confirm with OK . Quit using D and SYSTEM-MENU .
Changing the country
The set filter values depend on the respective country. It is therefore necessary to enter the
country to which these filter values apply.
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY/ON .
3 Press SYSTEM-MENU . The menu bar appears
4 Select the '
A
' icon using D or C .
5 Select line 'Features' using B or A and confirm with C .
Features
Access control Enter code…
Status box On
Auto resume On
Low power standby Off
6 Confirm the line 'Access control' using C .
7 Enter your four-digit code.
8 Select 'Change country' using B or A and confirm with C .
9 Select the corresponding country using A or B and confirm with
OK .
0 To end, press D and then SYSTEM-MENU .
ENGLISH
Access control (Child Lock)
To Next Page
Loading...
