76
Changing the PIN code
1 Switch on the TV set. If required, select the programme number for
the DVD recorder.
2 Switch on the DVD recorder using STANDBY/ON .
3 Press SYSTEM-MENU . The menu bar appears
4 Select the '
A
' icon using D or C .
5 Select 'Features' using B or A and confirm with C .
Features
Access control Enter code…
Status box On
Auto resume On
Low power standby Off
6 Confirm 'Access control' using C .
7 Enter your four-digit PIN code.
8 Select 'Change code' using A or B and confirm with C .
9 Enter the new code using the number buttons 0..9 . Enter the same
code again as confirmation.
0 Quit using D and SYSTEM-MENU .
I have forgotten my code
Press STOP h four times, then press OK . Access control is now switched
off. You can now enter a new code as described above.
Tip
Access control (Child Lock)
To Next Page
Loading...
