71203 - Communication with Analog Board fails
71300 - Audio routing on the Analog Board OK
71301 - Routing the Audio on the Analog Board
fails.
71302 - Invalid input.
71303 - Communication with Analog Board fails
71501 - Invalid slash version, default slash ver-
sion is set.
71502 - Setting the slash version on the Analog
Board fails.
71503 - Communication with Analog Board fails
71600 - Application Version
71601 - Can not find segment in FLASH ROM
on the Analog Board
71602 - Communication with Analog Board fails
71700 - Diagnostics Version
71701 - Can not find segment in FLASH ROM
on the Analog Board
71702 - Communication with Analog Board fails
71800 - Download Version
71801 - Can not find segment in FLASH ROM
on the Analog Board
71802 - Communication with Analog Board fails
72001 - Adjusting BarGraph Level failed
72002 - Communication with Analog Board fails
72101 - Storing clock correction failed
72102 - Value out of range: default value stored
72103 - Invalid input.
72104 - Communication with Analog Board fails
72201 - Initializing the 1Hz signal on the Clock
IC failed
72202 - Communication with Analog Board fails
72301 - Clearing the NVRAM on the Analog
Board fails
72302 - Communication with Analog Board fails
72400 - Segment checksum is: checksum which
is correct for every segment
72401 - Segment could not be found or segment
checksum is: checksum C, however it should be:
checksum E for every segment
72402 - Communication with Analog Board fails
72900 - Date received
72901 - Data returned
72902 - Communication on I2C-bus failed on the
Analog Board fails.
72903 - Communication with Analog Board fails
73001 - Storing the external presets on the
Analog Board fails
73002 - Communication with Analog Board fails
73100 - 0xslash version where slash version is
the slash version read from the Analog Board
73101 - Error while reading out slash version.
73102 - I2C Write error.
73103 - I2C Read error.
73104 - Communication with Analog Board fails
73201 - Storing the Reference Voltage for the
Tuner failed
25