Philips DVDR985 - Page 33

decoder failed.
90617 - VSM and Hostdec memory do not match
(compared after transfer)
90618 - Decoding of the Video data in the host
decoder memory failed
90619 - The data in the host decoder is not
equal to a colorbar
90620 - The video encoder did not return the
Group Of Picture count.
90621 - The video encoder did not receive data
from the VIP.
90622 - Execution of the command on the
Analog Board failed.
90623 - Initialization of VIP and EMPRESS failed
90624 - The video encoder did not return the
current status.
90625 - The video encoder timed out in BUSY
mode. (no VIP input)
90626 - The video encoder did not return the
current bit rate.
90627 - The video encoder did not switch to
ENCODING mode.
90628 - The video encoder could not start from
STOP/IDLE mode.
90629 - The video encoder did not switch from
IDLE to STOP mode.
90701 - Initialization of I2C failed
90702 - I2C communication to VIP failed
90703 - Initialization of VIP failed
90704 - Generation of Close Caption data failed
90705 - VIP not locked to Video signal
90706 - Initialization of VBI Extractor failed
90707 - No CC data received
90708 - Closed Caption data overrun
90709 - Closed Caption data does not match
90710 - Switch off colorbar failed
90711 - Execution of the command on the
Analog Board failed.
90801 - Error routing the Audio back to the
Digital Board.
90802 - Error cannot initialize I2C
90803 - Error cannot initialize VIP
90804 - Error cannot set ADC enable pin
90805 - Error cannot set VSM audio clock
90806 - Error preparing the 12kHz audio-sine
90807 - Error cannot initialize audio encoder
90808 - Error cannot initialize VSM audio in port
90809 - Error cannot initialize VSM audio in
DMA port
90810 -Error cannot initialize VSM audio out
DMA port
90811 - Error cannot initialize audio VSM out
port
90812 - Error cannot initialize host decoder
audio in
90813 - Error loop audio user/dealer cannot start
audio encoder
90814 - Error cannot start VSM audio in DMA
port
90815 - Error starting the 12 kHz Audio-sine
90816 - Error transfer data from audio encoder
to VSM
32