EasyManua.ls Logo

Philips DVDR985 - Page 32

Philips DVDR985
119 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
90415 - Cannot start VSM AV-out port
90416 - Transfer of data from VSM to host
decoder failed.
90417 - VSM and Hostdec memory do not match
(compared after transfer)
90418 - Decoding of the video data in the host
decoder memory failed
90419 - The data in the host decoder is not
equal to a colorbar
90420 - The video encoder did not return the
Group Of Picture count.
90421 - The video encoder did not receive data
from the VIP.
90422 - Execution of the command on the
Analog Board failed.
90423 - Initialization of VIP and EMPRESS failed
90424 - The video encoder did not return the
current status.
90425 - The video encoder timed out in BUSY
mode. (no VIP input)
90426 - The video encoder did not return the
current bit rate.
90427 - The video encoder did not switch to
ENCODING mode.
90428 - The video encoder could not start from
STOP/IDLE mode.
90429 - The video encoder did not switch from
IDLE to STOP mode.
90501 - Initialization of I2C failed
90502 - I2C communication to VIP failed
90503 - Initialization of VIP failed
90504 - Generation of Close Caption data failed
90505 - VIP not locked to Video signal
90506 - Initialization of VBI Extractor failed
90507 - No CC data received
90508 - Closed Caption data overrun
90509 - Closed Caption data does not match
90510 - Switch off colorbar failed
90511 - Execution of the command on the
Analog Board failed.
90601 - Initialization of I2C failed
90602 - Initialization of VIP and EMPIRE failed
90603 - Initialization of PLL / Link failed.
90604 - Next descriptor address set wrong.
90605 - Turning on the colorbar failed
90606 - No I2C communication possible to start
video encoder.
90607 - Starting the video encoder failed.
90608 - Transfer of data from video encoder to
VSM failed.
90609 - Stopping the encoder failed.
90610 - Turning off the color bar failed.
90611 - Cannot initialize host decoder parallel
input
90612 - Cannot initialize VSM AV-out DMA port
90613 - Cannot initialize VSM AV-out port
90614 - Cannot start VSM AV-out DMA port
90615 - Cannot start VSM AV-out port
90616 - Transfer of data from VSM to host
31