input
90212 - Cannot Initialize VSM AV-out DMA port
90213 - Cannot Initialize VSM AV-out port
90214 - Cannot start VSM AV-out DMA port
90215 - Cannot start VSM AV-out port
90216 - Transfer of data from VSM to host
decoder failed.
90217 - VSM and Hostdec memory do not match
(compared after transfer)
90218 - Decoding of the Video data in the host
decoder memory failed
90219 - The data in the host decoder is not
equal to a colorbar
90220 - The video encoder did not return the
Group Of Picture count.
90221 - The video encoder did not receive data
from the VIP.
90223 - Initialization of VIP and EMPRESS failed
90224 - The video encoder did not return the
current status.
90225 - The video encoder timed out in BUSY
mode. (No VIP input)
90226 - The video encoder did not return the
current bit rate.
90227 - The video encoder did not switch to
ENCODING mode.
90228 - The video encoder could not start from
STOP/IDLE mode.
90229 - The video encoder did not switch from
IDLE to STOP mode.
90301 - Initialization of I2C failed
90302 - I2C communication to VIP failed
90303 - Initialization of VIP failed
90304 - Generation of Close Caption data failed
90305 - VIP not locked to Video signal
90306 - Initialization of VBI Extractor failed
90307 - No CC data received
90308 - Closed Caption data overrun
90309 - Closed Caption data does not match
90310 - Switch off colorbar failed
90401 - Initialization of I2C failed
90402 - Initialization of VIP and EMPIRE failed
90403 - Initialization of PLL / Link failed.
90404 - Next descriptor address set wrong.
90405 - Turning on the colorbar failed
90406 - No I2C communication possible to start
video encoder.
90407 - Starting the video encoder failed.
90408 - Transfer of data from video encoder to
VSM failed.
90409 - Stopping the encoder failed.
90410 - Turning off the colorbar failed.
90411 - Cannot initialize host decoder parallel
input
90412 - Cannot Initialize VSM AV-out DMA port
90413 - Cannot Initialize VSM AV-out port
90414 - Cannot start VSM AV-out DMA port
30
To Next Page
