EasyManuals Logo

Philips DVP3142 User Manual

Philips DVP3142
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
English
12
C To hear sound of this DVD player
through your TV, use the audio cables
(white/red) to connect AUDIO OUT (L/
R) sockets of the DVD player to the
corresponding AUDIO IN sockets on the
RF modulator (cable supplied).
D Connect the Antenna or Cable TV
service signal to the ANTENNA IN or RF
IN socket on the RF modulator. (It may
have been connected to your TV
previously. Disconnect it from the TV).
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
AUDIO OUT
DIGITAL
OUT
VIDEO OUT
COAXIAL
COMPONENT VIDEO OUT
AUDIO IN
R L
VIDEO
IN
TO TVANT IN
CH3 CH4
ANT IN
ANT IN
1
3
4
2
RF coaxial cable to TV
Back of RF Modulator
(example only)
IMPORTANT!
If your television only has a single
Antenna In socket (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the
DVD playback on the television. See
your electronics retailer or contact
Philips for details on RF modulator
availability and operations.
Using an accessory RF modulator
A
Use the composite video cable (yellow)
to connect the DVD player’s VIDEO
OUT (CVBS) socket to the video input
socket on the RF modulator.
B Use the RF coaxial cable (not supplied) to
connect ANTENNA OUT or TO TV
socket on the RF modulator to the
ANTENNA IN socket on the television.
Connections (continued)
01-43_dvp3142_3144_eng2.indd 1201-43_dvp3142_3144_eng2.indd 12 2007-01-30 5:11:38 PM2007-01-30 5:11:38 PM

Table of Contents

Other manuals for Philips DVP3142

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips DVP3142 and is the answer not in the manual?

Philips DVP3142 Specifications

Sound Specifications IconSound Specifications
D/A converter (sound)24 bit, 192 kHz
frequency response30-20000 Hz
signal to noise ratio100
distortion and noise (1kHz)85 dB
crosstalk (1kHz)100 dB
dynamic range (1kHz)90 dB
Power IconPower
power consumption< 10 W
power supply50Hz, 230V
standby power consumption< 0.8 W
Picture/Display IconPicture/Display
D/A converter (picture)12 bit, 108 MHz
picture enhancementProgressive scan, Video upsampling
Weight and Dimensions IconWeight and Dimensions
packaging dimensions415 x 82 x 282 mm
set dimensions360 x 37 x 209 mm
set weight1.3 kg
weight including packaging2.4 kg

Related product manuals