Philips DVP3680 User Manual

12 EN
3 Change settings
This section helps you change the settings of this player.
Note
 You cannot change a menu option that is grayed out.
 To access [Preferences], stop the disc play.
 To return to the previous menu, press . To exit the menu, press .
General (sleep, standby...)
1 Press .
2 Select [Setup] > [General] to access the general setup options.
 [Disc Lock]: Lock or unlock a disc for play. To play a locked disc, you need to input your
password: press
to enter a digit, and press / to change a digit position. The default

 [OSD Language]: Select a language for on-screen menu.
 [Sleep Timer]: Set a period of time for this player to switch automatically to standby mode
from play.
 [Auto Standby]: Enable or disable auto standby. If enabled, this player switches automatically to
standby after 15 minutes of inactivity (for example, in pause or stop mode).
 [DivX(R) VOD Code]: Display the DivX
®
registration code and deregistration code.
Picture
1 Press .
2 Select [Setup] > [Video] to access the video setup options.
2
1
3
MP3
USB
Disc
Create
Setup
General
Disc Lock
OSD Language English
Off
On
Registration
Sleep Timer
Auto Standby
DivX(R) VOD Code
Video
Audio
Preference
Unlock

Philips DVP3680 Specifications

Picture and Display

D/A converter	12 bit, 108 MHz
Picture enhancement	Progressive scan, Video upscaling, Video Upscaling(720p, 1080i/p), High Def (720p, 1080i, 1080p)

Sound

D/A converter	24 bit, 192 kHz
Frequency response	30-20000 Hz
Signal to noise ratio	90
Distortion and Noise (1kHz)	80 dB
Crosstalk (1kHz)	90 dB
Dynamic Range (1kHz)	80 dB

Power

Power consumption	< 10 W
Power supply	50Hz, 110-240V
Standby power consumption	< 0.5 W

Dimensions

Packaging dimensions (W x H x D)	400 x 80 x 282 mm
Set dimensions (W x H x D)	360 x 39 x 209 mm