Why is there no sound on HDMI connection with my Philips DVD Player?
If you're not getting any sound from your Philips DVD Player via the HDMI connection, it might be because the connected device isn't HDCP compliant or is only DVI-compatible. To resolve this, make sure that the [ HDMI Audio ] setting is turned on in your DVD player's settings.
What to do if there is no picture on HDMI connection with my Philips DVP3360?
If you're not getting any picture on your Philips DVD Player when using an HDMI connection, first check if the HDMI cable is working correctly and replace it with a new one if necessary. Also, if this issue occurs after changing the HDMI video resolution, reset to the default mode by opening the disc compartment (press Z) and then pressing the numeric button ‘1’.
How to fix no sound on Philips DVP3360?
If you are experiencing a 'no sound' issue with your Philips DVD Player, ensure that the audio cables are correctly connected. Also, verify that the connected device is powered on and set to the appropriate input source.
How to fix Philips DVD Player buttons not working?
If the buttons on your Philips DVD player aren't working, try disconnecting the DVD player from the power outlet for a few minutes, and then reconnect it.
What to do if there is no picture on my Philips DVD Player?
If you're experiencing a 'no picture' issue with your Philips DVD Player, consult your TV manual to ensure you've selected the correct video input channel. Try changing the TV channel until you see the DVD screen.
Why is there no sound during DivX movies play on Philips DVD Player?
If you're not getting any sound during DivX movie playback on your Philips DVD Player, it's possible that the audio codec used in the DivX file isn't supported by the DVD player.
How to fix DivX subtitles that are not displayed correctly on Philips DVP3360 DVD Player?
To display DivX subtitles correctly on your Philips DVD Player: - Ensure that the subtitle file name is exactly the same as the movie file name. - Select the correct character set by pressing SETUP, then navigate to [ Preferences ] > [ DivX Subtitle ] in the menu, and choose the character set that supports the subtitle.
Why is the aspect ratio of the screen not aligned with the TV display setting on Philips DVP3360?
The aspect ratio on your Philips DVD Player screen may not align with your TV display setting because the aspect ratio is fixed on the DVD.
Why Philips DVP3360 DVD Player cannot read the contents of the USB flash drive?
The contents of your USB flash drive cannot be read by the Philips DVD player if the USB flash drive format is not compatible with this DVD player or if the drive is formatted with a file system not supported by this DVD player (e.g. NTFS).
General| Analog signal format system | PAL |
|---|---|
| Audio formats supported | MP3, PCM, WMA |
| Video formats supported | MPEG1, MPEG2 |
| MP3 bit rates | 32 - 320 Kbit/s |
| Frequency range | 30 - 20000 Hz |
| Signal-to-Noise Ratio (SNR) | 90 dB |
| Slideshow | Yes |
| Device type | DVD player |
| USB 2.0 ports quantity | USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them. |
| Digital audio coaxial out | 1 |
| Dimensions (WxDxH) | 360 x 210 x 37 mm |
| Power requirements | 230 V, 50 Hz |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 10 W |
Safety precautions and warnings for using the DVD player to prevent damage or injury.
Instructions for replacing the fuse in the UK mains plug.
Notes on compatibility issues with progressive scan and HDTVs.
Information on product recycling according to European directives.
Details about Dolby, Windows Media, DivX, and USB trademarks.
Information on copyright protection technology and UK copyright laws.
Highlights key features like video upscaling to 1080p and EasyLink.
Information on the DVD player's supported region codes for discs.
Instructions for connecting the DVD player to a TV using various video cables.
Steps to connect audio output to a TV, amplifier, or stereo system.
How to connect a USB device and the DVD player to a power outlet.
Instructions for inserting batteries and preparing the remote control for use.
Finding the correct TV channel and navigating on-screen menus.
Enabling Progressive Scan and using Philips EasyLink for enhanced control.
Instructions for inserting discs and starting playback of video and audio content.
Using remote controls to manage playback, skip, repeat, and view angles.
Playing DivX video, music (MP3/WMA), and photos from discs or USB.
Playing various media files directly from a connected USB device.
Converting audio CDs into MP3 files and saving them to a USB device.
Basic configuration like OSD language, disc lock, and sleep timer.
Configuring audio output options for different connection types and sound modes.
Adjusting video output settings like TV system, display format, and progressive scan.
Setting default languages, parental controls, PBC, and passwords.
Configuring HDMI settings, EasyLink, and one-touch controls.
Checking for and updating the DVD player's software from the Philips website.
Instructions for cleaning the DVD player and discs.
List of included accessories and supported playback media formats.
Technical details of video DAC, formats, resolutions, and audio performance.
Information on available connections, power supply, and consumption.
Laser specifications and physical dimensions of the DVD player.
Solutions for unresponsive buttons, no picture, and HDMI connection problems.
Troubleshooting for no sound, DivX audio, and video playback errors.
Resolving problems with DivX files, subtitles, and USB drive compatibility.
Definitions for Aspect ratio, DivX, HDMI, JPEG.
Definitions for MP3, One-touch play, and One-touch standby.
Definitions for PBC, Progressive Scan, and WMA.
To Next Page
