English
42
HDMI Setup
Video Setup Page (underlined options are the factory default settings)
Setup Menu Options (continued)
Continued...
{ EasyLink } – Enable HDMI CEC compliant TV/devices to
control each other with a single remote
control.
Notes:
–
Your TV and other connected devices must be compliant with
HDMI CEC.
–
You must turn on the HDMI CEC operations on your TV/
devices before you can enjoy the EasyLink controls. See your
TVs/devices manual for details.
–
Philips does not guarantee 100% interoperability with all
HDMI CEC compliant devices.
{ Auto Wake Up TV }
Press STANDBY button to turn on
(both your TV and this unit) and start
video disc play (if a video disc is found
in the disc tray). Your TV
automatically switches to the correct
video channel.
To disable this feature, select { Off }.
{ System Standby }
Press STANDBY/POWER button to
turn off this unit and all the HDMI
CEC compliant devices.
To disable this feature, select
{ Decline }.
Note: However, press and hold 2
button on this unit remote control
can still turn off all the HDMI CEC
compliant devices.
Note: If a noti cation message appears, con rm your setting by
selecting { OK } in the menu and press OK to proceed.
1dvp3962_3982_F7_eng.indd 421dvp3962_3982_F7_eng.indd 42 12/16/2008 1:35:43 PM12/16/2008 1:35:43 PM
To Next Page
Loading...
