Philips DVP520/02 User Manual

02(A)_8239 210 98882
English
12
Functional Overview
Front and Rear Panels
TV OUT
– Connect to SCART input of a TV
Audio Out (Left/Right)
– Connect to AUDIO inputs of an amplifier,
receiver or stereo system
Digital Out (Coaxial)
– Connect to coaxial AUDIO input of a
digital audio equipment
STANDBY-ON OPEN/CLOSE
STOP PLAY/PAUSE
STANDBY-ON B
–To switch the DVD Player to Standby
mode or ON
Disc tray
OPEN/CLOSE /
– Open/Close the disc tray
2; PLAY/PAUSE
– To start or interrupt playback
9 STOP
– To stop playback
IR Sensor
– Point the remote control towards this
sensor
Display
– Shows the current status of the DVD
Player
L
VIDEO OUT
S-VIDEO OUT
COAXIAL
TV OUT
MAINS
R
DIGITAL OUT AUDIO OUT
Mains (AC Power Cord)
– Connect to a standard AC outlet
S-Video Out
– Connect to S-Video input of a TV
Video Out (CVBS)
– Connect to CVBS Video input of a TV
Caution: Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
01-34 DVP520_02a1 18/03/2004, 6:30 PM12

Philips DVP520/02 Specifications

General

Type	DVD Player
Progressive Scan	Yes
Surround Sound	Dolby Digital
Remote Control	Yes
Video Playback Formats	DVD, VCD, SVCD
Audio Playback Formats	MP3, WMA
Connectivity	Composite video output
Dimensions (W x H x D)	360 x 62 x 245 mm
Video D/A Converter	10 bit
Audio D/A Converter	24 bit
Playback Media	DVD, CD, CD-R, CD-RW, DVD+R, DVD+RW, DVD-R, DVD-RW
Supported Disc Types	DVD, CD, CD-R, CD-RW
Output Resolution	576p