English
42
DVD Setup Menu Options
HDMI JPEG Mode
You can enjoy unsurpassed pictures at its
native resolution via your HDMI
connection or progressive scan mode.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
highlight {HD JPEG}, then press 2.
ON
Displays picture with high quality.
OFF
Displays picture with standard quality.
2 Press 3 4 to select a setting, then press
OK to confirm your selection.
HDMI Setup
The options included in HDMI Setup is:
‘Resolution’.
1 In ‘VIDEO SETUP PAGE’, press 3 4 to
highlight {HDMI Setup}, then press 2.
2 Press the 3 4 keys to highlight an option.
3 Enter its submenu by pressing 2.
4 Press 3 4 to select a setting, then press
OK to confirm your selection.
Resolution
You can select the resolution of the
picture according to your preference and
the connected HDMI TV.
➜ 480p: Interlaced output in 480 lines
for NTSC TV.
➜ 576p: Interlaced output in 576 lines
for PAL TV.
➜ 720p: Progressive output upscale to
720 lines.
➜ 1080i: Interlaced output upscale to
1080 lines.
➜
Auto: Output automatically based on
your display’s supported resolution.
Helpful Hint:
– You can also press HD UPSCALE
button on the front panel to switch HDMI
Resolution.
– If not display appears on the TV screen
due to unsupported resolution, recoonnect
any available interlace video output to your
display and re-adjust the resolution settings
to 480p/576p.
– Select AUTO to automatically display the
best resolutions settings.
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
001-51 DVP5960_Eng_37_RC3 05/07/06, 4:00 PM42
To Next Page
Loading...
