DVD Menu Options
1 Press 34 to highlight ‘Digital Output’.
2 Enter its submenu by pressing 2.
3 Press 34 to choose a setting.
➜
All: If you connected the DVD Player’s
Digital (Coaxial or Optical) jack to a
multi-channel decoder/receiver.
➜
PCM Only: Only if your receiver is
not capable of decoding multi-channel
audio.
4 Press OK, then press 1 to return to the
Audio Setup Page.
Helpful Hint:
– If DIGITAL OUTPUT is set to ‘All’, all
audio settings except MUTE are invalid.
Audio Setup Menu
The options in the Audio Setup menu are:
‘Downmix’, ‘Digital Output’, ‘LPCM
Output’, ‘Sound Mode’, ‘Reverb Mode’ and
‘D.R.C. (Dynamic Range Control)’.
1 Press SYSTEM MENU.
2 Press 3 4 to select the ‘Audio Setup’ page.
3 Press OK to confirm.
Downmix
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
LT/RT
STEREO
MAIN PAGE
DOWNMIX
D.R.C
1 Press the 34 keys to highlight ‘Downmix’.
2 Enter its submenu by pressing 2.
3 Press 34 to choose a setting.
➜
LT/RT: Select this option if your DVD
Player is connected to a Stereo with a
Dolby Pro Logic decoder.
➜
Stereo: Select this option if the TV or
Stereo has right and left Audio In jacks
but does not have Dolby Pro Logic.
4 Press OK, then press 1 to return to the
Audio Setup Page.
Digital Output
Set Digital output according to the
optional audio equipment you connected.
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
ALL
PCM ONLY
MAIN PAGE
DOWNMIX
D.R.C
LPCM Output
If you connect the DVD Player to a PCM
compatible receiver using Player’s Digital
(Coaxial or Optical) jack, you may need to
adjust ‘LPCM Output’.
Discs are recorded at a certain sampling
rate, measured in kHz. The higher the
sampling rate, the better the sound quality.
- - AUDIO SETUP PAGE - -
DIGITAL OUTPUT
LPCM OUTPUT
SOUND MODE
REVERB MODE
96K
48K
MAIN PAGE
DOWNMIX
D.R.C
1 Press 34 to highlight ‘LPCM Output’.
2 Enter its submenu by pressing 2.
3 Press 34 to choose a setting.
➜
48K: Play a disc recorded at the
sampling rate of 48 kHz.
➜
96K: Play a disc recorded at the
sampling rate of 96 kHz.
4 Press OK, then press 1 to return to the
Audio Setup Page.
Helpful Hint:
– The average setting for most Discs is
48K.
To Next Page
Loading...
