12
2. Setting up the monitor
Resolution notification
This monitor is designed for optimal
performance at its native resolution,
321E1SC/322E1C: 1920x1080@60Hz
325E1C: 1920x1080@60Hz(analog
input)&2560x1440@60Hz(digital input)
328E1C: 3840x2160@60Hz. When the
monitor is powered on at a different
resolution, an alert is displayed on
screen: Use
321E1SC/322E1C: 1920x1080
325E1C: 1920x1080(analog
input)&2560x1440(digital input)
328E1C: 3840x2160 for best results.
Display of the native resolution alert can
be switched off from Setup in the OSD
(On Screen Display) menu.
Physical Function
Tilt
321E1SC
20°
-5°
322E1C/325E1C/328E1C
20°
-5°
Warning
• To avoid potential screen damage,
such as panel peeling, ensure that
the monitor does not tilt downward
by more than -5 degrees.
• Do not press the screen while
adjusting the angle of the monitor.
Grasp only the bezel.
To Next Page
Loading...
