EarlyVue VS30 Instructions for Use 13-1
13
Printing
This chapter describes the optional integrated recorder that can be used for printing. It
describes how to:
• Load the recorder paper
• Print one or more patient records
• Adjust settings for printed waveforms
This chapter briefly touches on automatic NBP printing and automatic printing when a
physiological alarm occurs. For details on these methods, see “Enabling Automatic NBP
Printouts” on page 6-7 and “Automatically Printing a Record when an Alarm Occurs” on
page 4-11, respectively.
WARNING
Printed and exported patient records contain patient IDs and other patient data. Ensure that the
printed data is handled according to your facility’s electronic protected health information (ePHI)
guidelines. Only authorized personnel should be allowed to view, handle, store, or transmit patient
data.
Loading the Recorder Paper
Caution
Use only Philips-supplied paper. Using the wrong paper can damage the recorder. If the paper is
inserted incorrectly, no data is printed.
To load the paper in the recorder
1 Press the button on the left side of the recorder door to open the door. If the door
does not open completely, pull it toward you.
2 Remove the empty paper core.
To Next Page
Loading...