9
English
English
When you select the pre-ground coffee function:
- it is automatically stored.
- you can only brew one coffee at a time.
- you cannot select a different aroma strength.
Dispensing hot water
1 If attached, remove LatteGo.
2 Place a cup under the hot water spout.
3 Tap the 'More Drinks' icon and use the up and down arrows to select hot water.
4 Use the up and down arrows to adjust the hot water quantity and/or temperature to your
preference.
5 Press the start/stop button.
-
Hot water is dispensed from the hot water spout (Fig. 15).
6 To stop dispensing hot water before the machine is finished, press the start/stop button
again.
Personalizing drinks
The machine allows you to adjust the settings of a drink to your own preference and to store the
adjusted drink in a personal profile. The different profiles have different colors.
After selecting a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks'
icon, you can do the following things:
1 adjust the aroma strength with the up and down icons (Fig. 5). There are 5 strengths, the lowest
is the mildest and the highest is the strongest.
2 adjust the coffee quantity (Fig. 16) and/or the milk quantity with the up and down icons. There
are 5 quantities for each of the settings.
As soon as the machine has finished brewing, the settings you selected will be stored
automatically in the profile you chose.
Select a profile
You can select a profile and store a recipe using My coffee choice profiles (My Coffee Choice
Profiles).
1 Tap the profiles icon repeatedly to select one of the colored profiles. All profiles have a
different color.
2 Select a drink by tapping one of the one-touch drink icons or by tapping the 'More Drinks' icon.
3 Adjust the drink settings to your favorite taste.
4 Press start/stop button to brew the drink you selected
-
Your new settings have now been stored in the colored profile you selected.
You can always restore the factory settings of the machine (see 'Restoring factory settings').
To Next Page
Loading...
