EPIQ 5 & 7 Training Manual
© 2016 Conquest Imaging
On the calibration display, touch the dark cross-hairs.
Click Yes to save the calibration data.
Trackball Inspection and Cleaning
The trackball should be inspected and cleaned as a part of normal
preventive maintaince. Before cleaning you should check the trackball
for smooth operation.
To Clean the Trackball:
To remove the trackball, use your thumb and index finger press
down on the retainer ring. Turn the ring counter clockwise and
use a stiff piece of thin cardboard (a business card for example)
to lift it out of the reservoir as shown below:
To Next Page
Loading...