Philips EVNIA 27M1F5500P - Setting Up and Operating the Monitor; Installation and Package Contents

5
2. Setting up the monitor
2.1 Installation
1
Package contents
*DP *HDMI
AC/DC Adapter
* Earphone-Hang
* USB A-B
Quick start
Register your product and get support at www.philips.com/welcome
27M1F5500P
*Dierentaccordingtoregion
Note
Use only AC/DC adapter model: Philips
ADPC20120.
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2)Useyourngerstotightenthe
screw located at the bottom of
the base.
(3) Use a screwdriver to tighten the
screw located at the bottom of
the base, and secure the base to
the stand tightly.
(4) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
2
1
4
3
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.