5
2. Setting up the
monitor
2.1 Installation
1
Package contents
*DP *HDMI
* USB A-B
Power
Quick start
Register your product and get support at www.philips.com/welcome
27M2C5500W
*Dierent according to region
2
Install the base
1. Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
2. Hold the stand with both hands.
(1) Gently attach the base to the
stand.
(2) Use your ngers to tighten the
screw located at the bottom of
the base.
(3) Gently attach the stand to the
VESA mount area until the latch
locks the stand.
3
1
2
Caution
Place the monitor face down on a
smooth surface. Pay attention not to
scratch or damage the screen.
To Next Page
Loading...
