FEATURES
14
You can select up to 32 titles and store them in the
memory in a desired sequence. You can store any
track/titles more than once.
1 While playback is stopped, select a track/title with
4 or ¢.
2 Press PROGRAM to store the track/titles.
y PROGRAM lights up, the track/titles number
programmed and P with the total number of
stored track/titles are displayed.
3 Select and store all desired tracks in this way.
4 Press 38 to start playback of your selected track/titles.
y PROGRAM is shown and playback starts.
• You can review the program by pressing PROGRAM for
more than 2 seconds.
y The display shows all stored track/titles in sequence.
Note: – If you try to store more than 32 track/titles, FULL is displayed.
Erasing the program
1 If necessary, press 7 to stop playback.
2 Press 7 to erase the program.
y CLr is displayed once, PROGRAM goes off and the program is
erased.
Notes: The program will also be erased if you
– interrupt the power supply,
– open the CD lid, or
– the set is switched off automatically.
PROGRAM
MODE
Programming track/title numbers
English
EXP201/01 eng 27/7/01 16:33 Page 14
To Next Page
Loading...
