EasyManua.ls Logo

Philips FC8732 - Using the Appliance and Maintenance; Accessory Attachment and Operation; Emptying the Dust Bucket; Filter Cylinder Maintenance

Philips FC8732
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Crevice tool and small brush
You can connect the crevice tool (1) or the small brush (2) directly to the handgrip or to the
tube (Fig. 8).
Accessory clip
The accessory clip can simply be snapped onto the tube.
You can snap the crevice tool and the small brush onto the clip (Fig. 9).
Using the appliance
1
Pullthecordoutoftheapplianceandputthemainspluginthewallsocket.
2 Presstheon/offbuttontoswitchontheappliance(Fig.10).
During vacuuming, you can adjust the suction power with the suction power knob (Fig. 11).
Use maximum suction power to vacuum very dirty carpets and hard oors.
Use minimum suction power to vacuum curtains, table carpets, etc.
If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park
the tube in a convenient position (Fig. 12).
Cleaning and maintenance
Do not clean any parts of the appliance in the dishwasher.
Alwaysswitchtheapplianceoffandunplugitbeforeyouremoveandcleananyparts.
Emptying the dust bucket
Empty the dust bucket as soon as the dust level has reached the round disc of the lter cylinder
case (Fig. 13).
1 Disconnect the hose from the appliance.
2 Pullthedustbucketretainerdownwardstoreleasethedustbucket(Fig.14).
3 Grab the dust bucket handle and lift the dust bucket out of the appliance (Fig. 15).
4 Holdthedustbucketoveradustbinandlifttheltercylindercaseoutofit.(Fig.16)
5 Empty the dust bucket into the dustbin (Fig. 17).
You can clean the dust bucket with cold tap water and some washing-up liquid.
6 Puttheltercylindercasebackintothedustbucketandputthebucketbackintothe
appliance.
Makesureyouhaveinsertedtheltercylinderintotheltercylindercase,otherwiseitisnot
possible to close the dust bucket retainer.
Cleaning and maintenance of lters
Filter cylinder
Clean the lter cylinder every week.
1 Removethedustbucketfromtheappliance,unlocktheltercylinderlock(1)andliftthe
ltercylinderoutoftheltercylindercase(2)(Fig.18).
2 Cleantheltercylinderwiththebrushsupplied.Brushfromthetopoftheltercylinder
downwards along the ribs (Fig. 19).
Onlyusethebrushsupplied!Otherbrushesmaydamagetheltercylinder.
3 Removetheltercylindercasefromthedustbucket.
-
-
-
-
-
-
-
-
ENGLISH8

Related product manuals