Philips FC9108 - Adjusting Suction Power; Storing the Vacuum Cleaner; Replacing the Dustbag

Adjusting suction power
◗ You can adjust the suction power while vacuum cleaning.
C
1 Use the slide control on top of the appliance.
C
2 Set the slide control to MAX for maximum suction power.
Use maximum suction power for vacuum cleaning very dirty carpets
and hard floors.
3 Set the slide control to MIN for minimal suction power.
Use minimum power for vacuum cleaning curtains, table carpets, etc.
Storing the vacuum cleaner
1 Switch the appliance off.
2 Remove the mains plug from the wall socket.
C
3 Rewind the mains cord by pressing the cord rewind button.
C
4 Put the appliance in upright position and attach the nozzle to
the appliance by inserting the ridge on the nozzle in the slot.
Replacing the dustbag
C
1 Replace the dustbag as soon as the dustbag-full indicator
changes colour (even when the nozzle is not placed on the
floor).
2 Switch the appliance off.
ENGLISH 11