- The hard-oor nozzle is designed for gentle cleaning of hard oors (Fig. 18).
1 Youcanconnectthecrevicetool(1),thesmallnozzle(2)orthesmallbrush(3)directlyto
thehandgripofthehoseortothetube.Usethesamemethodasforthetube.(Fig.19)
- Use the crevice tool to clean narrow corners or hard-to-reach places.
- Use the small nozzle to clean small areas, e.g. the seats of chairs and sofas.
- Use the small brush nozzle to clean computers, bookshelves etc.
1 Snaptheaccessoryholderontothehandgrip(Fig.20).
2 Snaptwoaccessoriesintotheaccessoryholder:
- Crevice tool and small nozzle (Fig. 21).
- Crevice tool and small nozzle (Fig. 22).
Note: The small nozzle must be placed in the accessory holder as shown in the picture.
1 Removethebatterycompartmentcover.
2 Placethebatteriesinthebatterycompartment(Fig.23).
Makesurethe-and+polespointintherightdirection.
3 Reattachthebatterycompartmentcover
1 Pullthecordoutoftheapplianceandputthemainspluginthewallsocket.
2 Presstheon/offbuttonontopoftheappliancewithyourfoottoswitchonthe
appliance(Fig.24).
During vacuuming, you can adjust the suction power.
- Use maximum suction power to vacuum very dirty carpets and hard oors.
- Use minimum suction power to vacuum curtains, table carpets, etc.
With the infrared remote control, you can set the suction power to one of 5 different suction
power settings.
-
When you switch on the appliance, it always starts operating at the highest suction power setting.
- To reduce the suction power by one setting, press the - button. (Fig. 25)
To increase the suction power by one setting, press the + button.
- During vacuum cleaning, you can adjust the suction power with the suction power knob on top
of the appliance (Fig. 26)
ENGLISH 9
To Next Page
Loading...
