Philips Fidelio E6 - Product Specifications; Amplifier Specifications; Audio Input Specifications; USB Specifications

25EN
8 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• Total output power:
192W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUDIO IN: 500 mV
• AUX: 1000 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class (MSC)
• File system: FAT16, FAT32, NTFS
• Playable audio les: .aac, .mka, .mp3, .wav,
.m4a, .ac, .ogg, .ape, .dsf, .dff
WLAN
• Support wireless standards:
IEEE802.11 a/b/g/n
• Supported channels:
• 2.4GHz: 1 to 13 (Europe) or 1 to 11
(US and Asia)
• 5GHz: 36, 40, 44, 48 (worldwide) and
149, 153, 157, 161, 165 (US and Asia)
Bluetooth
• Bluetooth proles: A2DP, AVRCP,
• Bluetooth version: Bluetooth V4.1 with
Bluetooth Low Energy
Main unit (left and right base speakers)
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 70 W
• Standby power consumption:
• ECO standby: ≤ 0.5 W
• Networked standby: < 6 W
• Dimensions (W x H x D):
161 x 302 x 161 mm
• Weight: 2.4 kg/each
• Built-in speakers
• Left/Right channel:
2 x woofer (76.2 mm/3", 8 ohm) +
2 x tweeter (25.4 mm/1", 8 ohm)
• Center channel: 2 x full-range
(76.2 mm/3", 8 ohm)
Surround speakers
• Speaker impedance: 8 ohm
• Speaker drivers: 2 x 63.5 mm (2.5")
full range
• Dimensions (W x H x D):
161 x 111 x 161 mm
• Weight: 1.0 kg/each
Subwoofer
• Power supply: 110-240 V~, 50-60 Hz
• Power consumption: 30 W
• Standby power consumption: ≤ 0.5 W
• Impedance: 4 ohm
• Speaker drivers: 1 x 165 mm (6.5") woofer
• Dimensions (W x H x D):
222 x 441 x 222 mm
• Weight: 5.4 kg
Remote control batteries
• 2 x AAA-R03-1.5 V