4 Cableless Monitoring
92
IntelliVue CL Pods
The two IntelliVue CL Pods provide measurement values for SpO
2
and NBP on the built-in display,
and communicate them to the fetal monitor using short range radio (SRR). They are controlled with
SRR from the Avalon CL base station and the connected fetal monitor.
The maternal measurement pods are assigned by docking them at the Avalon CL base station.
The CL SpO
2
Pod and the CL NBP Pod have an LCD display and three keys for basic operation e.g.
to assign the device to a patient:
For further details, see the IntelliVue Cableless Measurements Instructions for Use.
CL NBP Pod CL SpO
2
Pod
1 Integrated LCD display
2 Hardkeys
3 Measurement identifier
To Next Page
Loading...
